The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for Acura

Home

» High Output Alternators

» Acura

CSX

ILX

At PowerBastards, we proudly offer a premium selection of high-output alternators for Acura vehicles, engineered for exceptional performance, durability, and efficiency. Whether you're powering a high-performance sound system, aftermarket lighting, or heavy-duty accessories, our Acura high amp alternators provide the reliable power you need. Designed as the ultimate Acura alternator upgrade, these high-amperage solutions ensure your vehicle operates at peak performance under all conditions. Choose PowerBastards to enhance your Acura’s electrical capabilities and experience superior, worry-free driving every time.

Upgrade to an Acura High Amp Alternator for Peak Efficiency

Our Acura high amp alternators are engineered to exceed factory standards, offering higher amperage output, exceptional idle performance, and superior durability. Each unit is crafted to fit directly into your factory mounting points without modifications, making installation seamless. From heavy-duty winches to powerful audio setups, these heavy-duty alternators for Acura are ideal for enthusiasts and professionals alike. When you choose an Acura performance alternator from PowerBastards, you're investing in a reliable power source built to handle the most demanding electrical loads.

Compatible Acura Models

Every high-output alternator we build is vehicle-specific, ensuring a perfect fit and optimized performance for your Acura. Explore our lineup below to find the best aftermarket alternator for your model:

Acura Integra High Output Alternator

A popular choice for those running aftermarket lighting, audio systems, or turbocharged setups. Our high-amperage alternator for Acura Integra guarantees consistent power delivery to all your accessories.

Acura TL High Output Alternator

Upgrade your TL’s electrical system to handle advanced electronics, upgraded sound systems, and performance modifications with confidence using our Acura TL high amp alternator.

Acura TSX High Output Alternator

Our Acura TSX high-output alternator delivers stable, high-output power, meeting the demands of upgraded electronics and performance accessories while ensuring reliability.

Acura MDX High Output Alternator

Perfect for MDX owners who rely on winches, power inverters, auxiliary lighting, or heavy-duty accessories. This Acura MDX alternator upgrade enhances capability and safety.

Acura RSX High Output Alternator

Ideal for RSX builds featuring high-draw audio systems, aftermarket lighting, or racing accessories. The Acura RSX performance alternator is engineered for seamless power supply under load.

Acura RDX High Output Alternator

A must-have for RDX enthusiasts using dual battery setups, off-road gear, or upgraded audio equipment. Our high-output alternator for the Acura RDX ensures maximum efficiency and reliability.

Acura Legend High Output Alternator

For the Acura Legend, our high-amperage alternator provides modern, robust power to keep your classic running strong. This Acura alternator upgrade supports all electrical enhancements without sacrificing originality.

Perfect High Output Alternator for Your Acura

Whether you’re looking for an Acura performance alternator, a heavy-duty Acura alternator, or simply a reliable Acura alternator upgrade, PowerBastards has the perfect solution. We are committed to delivering high-quality, vehicle-specific, high-output alternators for Acura that meet and exceed expectations. Browse our collection today and experience the difference a premium aftermarket alternator can make for your Acura Integra, TL, TSX, MDX, RSX, RDX, or Legend.