The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for Infiniti

Home

» High Output Alternators

» Infiniti

EX35

EX37

FX35

FX37

Infiniti vehicles are known for their luxury, performance, and advanced technology. With such complex electrical systems, it's essential to have a reliable alternator that can handle the demands. PowerBastards' High Output Alternators for Infiniti are engineered to provide stable power to ensure all of your vehicle's systems work seamlessly. Whether you're enhancing an audio setup or keeping all onboard electronics functioning perfectly, these alternators offer the performance and reliability you need.

Why Choose High-Output Alternators for Infiniti?

Infiniti owners expect superior performance from their vehicles. To support the demands of luxury features like navigation systems, advanced safety tech, and premium audio, you need an alternator that can keep up. A high-amperage alternator for Infiniti ensures that your vehicle's electrical systems receive a stable and abundant current, preventing voltage drops and maximizing component longevity.

These alternators are designed to manage the electrical load efficiently, even under heavy use, providing seamless power to everything from headlights to onboard entertainment. As your Infiniti's power needs grow, PowerBastards ensures you'll always have the necessary backup.

Benefits of Upgrading to Infiniti High-Amp Alternators

Here's why upgrading to a high-amperage alternator is the smart choice for your Infiniti:

Superior Power Delivery

PowerBastards' Infiniti high amp alternators enhance your vehicle's electrical output, ensuring systems like navigation, lighting, and audio receive steady power. This upgrade eliminates issues like dimming lights and slow electronics, offering a smoother, more responsive driving experience, whether on long trips or daily commutes.

No More Electrical Strain

As your vehicle's electronics grow more demanding, a stock alternator may fall short. PowerBastards' high amp alternators are designed to handle these increased needs, delivering consistent power to reduce strain on your system and prevent performance inconsistencies. Keep your vehicle's electronics running efficiently and reliably.

Direct Fit, No Modifications Needed

Our Infiniti high-output alternators are built for a direct fit, ensuring a quick, hassle-free installation without the need for modifications. Upgrade easily and enjoy enhanced performance immediately.

Protect Your Vehicle's Electronics

Upgrading to a high-amperage alternator protects your Infiniti's sensitive electronics, preventing damage from unstable power. Extend the life of your vehicle's battery and keep its luxury features intact while improving overall performance.

Infiniti Models That Benefit from High-Output Alternators

Our high-output alternators are available for a variety of Infiniti models, including:

Each alternator is crafted to meet the power demands specific to these models, providing a perfect fit and superior performance.

Enhance Performance with Infiniti Performance Alternators

Infiniti performance alternators from PowerBastards are designed to handle higher power demands, making them perfect for luxury vehicles. Whether you're running high-end electronics or simply seeking a more reliable power supply, upgrading to a performance alternator is a must. You'll experience improved performance, reliability, and peace of mind knowing your vehicle's electrical systems are well-supported.

Shop now and power up your Infiniti with High Output Alternators for Infiniti from PowerBastards!