The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for Chrysler

Home

» High Output Alternators

» Chrysler

If you're looking to give your Chrysler the electrical boost it deserves, you're in the right place. At PowerBastards, we proudly offer high-output alternators for Chrysler vehicles, designed to deliver superior performance, rock-solid reliability, and the extra power your vehicle needs for modern-day demands.

Why Upgrade to a High-Output Alternator for Chrysler?

Your Chrysler is built for comfort, style, and innovation, but factory alternators can fall short when it comes to powering aftermarket accessories and high-demand systems. Our High Output Alternators for Chrysler are specifically engineered to handle extra electrical loads with ease. Whether you're adding a powerful sound system, upgraded lighting, or advanced tech gadgets, these alternators keep everything running smoothly.

By choosing a Chrysler high amp alternator, you'll enjoy steady voltage, no more flickering headlights, and peace of mind knowing your battery isn't being overworked. This upgrade helps extend the life of other electrical components, making it a smart investment for anyone who wants to get the most out of their Chrysler.

Benefits of a Chrysler High-Amp Alternator

Upgrading to a Chrysler high-amp alternator offers many valuable advantages that improve your vehicle's overall performance and reliability. Here's what makes it a smart investment:

Key Benefits

Higher Amperage Output: Extra power for entertainment, navigation, and safety systems while preventing dimming lights and slow accessories.
Improved Protection: Reduces battery strain, prevents unexpected failures, and maintains stable voltage at all speeds.
Supports Accessories: Perfect for aftermarket sound systems, lighting, and tech upgrades, allowing room for future enhancements.
Proven Durability: Built to handle harsh conditions and thoroughly tested for reliability and long service life.

Seamless Chrysler Alternator Upgrade

Worried about installation? Don't be. Our Chrysler alternator upgrade options are designed for a direct fit, making the process simple and stress-free. No complex modifications are needed — just a perfect fit that gets you back on the road faster.

From weekend DIYers to professional mechanics, anyone can appreciate the straightforward installation and immediate performance boost. Upgrading to an aftermarket alternator Chrysler drivers can trust means you'll see real benefits from day one.

Perfect for All Chrysler Models

At PowerBastards, we have high-output alternators for Chrysler models like the

Chrysler 300: Chrysler 300 is perfect for drivers who want to support powerful sound systems, advanced lighting, and luxury tech features without straining the electrical system.
Chrysler Pacifica: This model is ideal for families and travelers who rely on multiple onboard electronics and entertainment systems to stay powered on every trip.
Chrysler Voyager: For those needing reliable electrical performance to handle added accessories, safety tech, and daily driving demands with ease, Chrysler Voyager is the answer.

No matter which model you drive, we've got a reliable solution that matches your vehicle's needs.

These Chrysler performance alternator options are made to support feature-rich interiors, advanced navigation, and entertainment systems without a hitch. You'll notice smoother operation and more dependable power every time you drive.

Explore our full range of High Output Alternators for Chrysler to find the perfect solution for your vehicle. Upgrade confidently and keep your Chrysler performing at its best every time you drive.