The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for Chevrolet

Home

» High Output Alternators

» Chevrolet

Astra

Astro Van

Avalanche

Aveo

C / K / R / V SERIES PICKUPS

Silverado 1500 Legacy

When it comes to your Chevrolet, you expect strong performance and dependable power every time you turn the key. At PowerBastards, we offer high-output alternators for Chevrolet that deliver exactly that — and more. These alternators are designed to handle demanding electrical needs, making them the perfect choice for Chevrolet owners who want extra reliability and power without compromise.

Why Upgrade to a Chevrolet High-Amp Alternator?

If you’ve added powerful audio systems, off-road lights, winches, or upgraded electronic accessories to your Chevrolet, a standard factory alternator just won’t cut it. That’s where a Chevrolet high-amp alternator comes in. These high-amperage alternators for Chevrolet provide the extra current your vehicle needs to run all your add-ons smoothly.

Whether you drive a Silverado, Tahoe, or Camaro, installing a Chevrolet high-amp alternator prevents voltage drops and keeps your battery healthy by reducing strain. You’ll avoid annoying issues like flickering headlights or slow accessory performance, and enjoy a smoother, more reliable driving experience.

Chevrolet Performance Alternator for Enhanced Power

A Chevrolet performance alternator is more than just a replacement part — it’s a serious upgrade for your entire electrical system. When you choose one of our High Output Alternators for Chevrolet, you’re ensuring your vehicle can handle extra power demands without breaking a sweat.

Our alternators are tested under strict conditions to guarantee they can manage the electrical load from heated seats, heavy-duty winches, upgraded sound systems, or any other accessories you might add. By choosing a Chevrolet alternator upgrade, you’re investing in long-term performance and peace of mind.

Fits a Wide Range of Chevrolet Models

Our High Output Alternators for Chevrolet are designed to fit a variety of popular Chevy models, making it easier than ever to upgrade your ride. Some of our most popular compatible models include:

Whether you're outfitting your Silvera for work, enhancing your Tahoe for adventure, or pushing your Corvette’s performance to the next level, a heavy-duty alternator Chevrolet owners trust will keep your systems running strong.

Benefits of a Chevrolet Alternator Upgrade

Opting for a Chevrolet alternator upgrade from PowerBastards comes with major benefits. These alternators are designed for easy, direct-fit installation — no complicated modifications are required. Once installed, you'll notice more consistent voltage output and improved battery life.

Our aftermarket alternator Chevrolet options offer high output even at low RPMs, which is perfect for off-roading, towing, or heavy city driving. A high amperage alternator for Chevrolet also gives you the freedom to expand your vehicle’s capabilities without worrying about power shortages.

Dependable Power for Every Chevrolet

Our High Output Alternators for Chevrolet are built to support demanding electrical systems, whether you're running auxiliary lights, upgraded audio, heavy-duty winches, or advanced electronics. Engineered for reliability and maximum performance, each unit delivers consistent power output even at low RPMs, helping you avoid voltage drops and keeping your battery charged and healthy.

With direct-fit options for a wide range of Chevrolet models, our Chevrolet high amp alternator, Chevrolet performance alternator, and heavy-duty alternator make upgrading simple and stress-free. Explore our selection and find the ideal alternator to match your vehicle’s needs.