The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for Kia

Home

» High Output Alternators

» Kia

AMANTI

Borrego

Cadenza

Forte

At PowerBastards, we know your Kia deserves more than just standard power. Whether you're driving a Telluride on a family adventure, cruising in a sleek K5, or commuting in a practical Sportage, your vehicle's electrical system supports every mile. That's where our High Output Alternators for Kia come in, delivering unmatched reliability and performance.

Why Choose a High-Output Alternator for Kia?

Modern Kia vehicles are packed with advanced tech — big infotainment screens, premium audio, navigation, and safety systems all depend on steady power. A factory alternator can sometimes struggle, leading to dim lights or slow-charging accessories. Our High Output Alternators for Kia solve these problems by providing higher amperage and more consistent power.

Upgrading ensures you enjoy every feature your Kia offers without worrying about voltage drops or electrical strain. It's a simple change that makes a huge difference in how your car feels and functions day to day.

Benefits of a Kia High Amp Alternator

A Kia high amp alternator is more than just an upgrade — it's a long-term investment in your vehicle's health and performance. By supplying greater amperage, your Kia can handle extra demands from modern gadgets, custom lighting, or aftermarket audio setups.

Here's what you can expect:

Stronger and more stable electrical performance
Extended battery life by reducing strain
No flickering lights or lagging accessories
Smoother operation of all electrical components

Every Kia high amp alternator from PowerBastards is designed for a direct fit. No extra modifications, no surprises — just straightforward installation and immediate improvement.

Perfect Fit for Every Kia Model

We proudly offer high-output alternators for Kia models like the

Telluride,
Seltos,
Sportage,
K5,
Carnival.

Each alternator is carefully engineered to match your Kia's specific needs, ensuring a seamless transition from your stock setup to a powerful, high-performance system.

With a high amperage alternator for Kia, you're ready to confidently power all your accessories, even in extreme conditions or during long trips. These alternators are also perfect for anyone planning on adding aftermarket upgrades that demand extra power.

The Advantages of a Kia Performance Alternator

If you're looking to push your Kia further, a Kia performance alternator is a smart move. Beyond just supporting electronics, this upgrade helps improve the overall efficiency of your vehicle. You'll notice quicker starts, brighter lights, and more responsive electronic systems — all signs of a healthy, powerful electrical backbone.

When you choose a Kia performance alternator from PowerBastards, you're getting a product that has been rigorously tested to meet the highest standards. It's built to handle more load without overheating or losing efficiency.

Upgrade Your Kia Today

Don't let a weak alternator hold you back. Explore our range of high-output alternators for Kia and find the perfect match for your model. Whether it's a Telluride, Seltos, Sportage, K5, or Carnival, we have you covered.

Upgrade to a Kia high-amp alternator, and experience the power, reliability, and confidence you deserve. Shop now and keep your Kia ready for every journey ahead.