The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High Output Alternators for AM General

Home

» High Output Alternators

» AM General

Hummer

At PowerBastards, we proudly offer high-output alternators for AM General vehicles designed to deliver superior power, efficiency, and durability. When you demand more from your AM General, our high-performance alternators ensure your electrical systems run smoothly, no matter the conditions.

Why Choose High-Output Alternators for AM General?

Factory alternators often fall short when you add powerful accessories like off-road lights, winches, and upgraded audio systems. High-output alternators for AM General are engineered to handle these increased electrical demands without compromising performance.

Handle Heavy Electrical Loads

Our alternators prevent common issues such as dimming headlights, battery drain, and weak accessory performance. By upgrading to a Power Bastards AM General high amp alternator, you get consistent voltage and reliable power for all your vehicle's needs.

Built for Off-Road and Heavy-Duty Use

From the rugged Hummer H1 to the versatile Hummer H2 and H3, our High Output Alternators for AM General are built to withstand harsh conditions, including extreme heat, vibrations, and off-road adventures.

Benefits of an AM General High Amp Alternator

Upgrading to an AM General high amp alternator means more than just extra power. It ensures your electrical system operates at peak efficiency and keeps all components running strong.

Increased Amperage for Maximum Efficiency

An AM General performance alternator delivers higher amperage than stock units, improving overall vehicle performance and extending battery life. With a high amperage alternator for AM General, you can confidently power multiple accessories without worrying about sudden voltage drops.

Direct-Fit Installation

Our alternators are designed as direct-fit replacements, eliminating the need for custom modifications. Every aftermarket alternator AM General comes with detailed instructions and all necessary hardware, making installation easy and hassle-free.

Model-Specific Alternator Upgrades

PowerBastards understands that each AM General model has unique needs. That's why we offer specific solutions tailored for each vehicle.

Hummer H1, H2, and H3 Solutions

We provide High Output Alternators for AM General Hummer H1, High Output Alternators for AM General Hummer H2, and High Output Alternators for AM General Hummer H3, ensuring perfect compatibility and performance across the entire lineup.

Heavy Duty and Aftermarket Options

Choosing a heavy-duty alternator, AM General from PowerBastards guarantees long-lasting performance. Our units are engineered to resist heat, handle high loads, and deliver reliable power even in the most demanding environments.

Superior Quality and Longevity

Our aftermarket alternator AM General options are crafted with premium materials and advanced technology, providing better performance and longer lifespan compared to standard factory alternators.

Why Trust PowerBastards?

At PowerBastards, we take pride in offering the best AM General alternator upgrade options on the market. Each AM General high amp alternator undergoes rigorous testing to ensure it meets our high standards for power and reliability.

Boost Your Vehicle's Capability

With a new AM General performance alternator, you can unlock your vehicle's full potential and enjoy reliable power for every adventure. Whether on the trail or the highway, your AM General deserves the best.

Upgrade Today

Don't let a weak factory alternator limit your AM General's performance. Choose High Output Alternators for AM General from PowerBastards and experience the difference in power, reliability, and efficiency.

Explore our full selection of AM General alternator upgrade options today and prepare your vehicle to handle anything. With PowerBastards, your AM General gets the electrical strength it needs to perform at its best on every journey.