The alternator I bought from you doesn't work.

Each alternator is bench-tested before shipping. Apparent failure is usually due to ordering the wrong unit, shipping damage, or installation mistakes. Verify the part number, inspect for damage, and review the proper installation steps (Technical Tip TT-648) before contacting support.

The alternator I bought from you doesn't "put out".

Low-output symptoms are often caused by factors outside the alternator. Measure voltage directly at the rear of the unit with a digital meter; if readings seem low, check the common issues listed below or return the alternator for a free bench test.

High-output alternators ship with an overdrive pulley that may require a belt about 1 inch shorter than stock. Use a quality, oil-free belt to prevent slip and ensure full output.

Regulator plug not plugged in, not seated properly or pinched wire

Make sure the small regulator plug on the alternator is fully seated and oriented correctly. A pinched or missing connection will prevent charging. Self-exciting models (e.g., Fitzall 220A+) do not use this plug.

Battery warning light bulb in dash missing, blown or bad connection

Some vehicles rely on the dash battery-warning bulb to excite the alternator. A blown, missing, or poorly connected bulb can cause a no-charge condition.

Customer changed alternator pulley

Replacing the supplied overdrive pulley with a larger-diameter pulley slows the alternator and decreases charge output.

Vehicle crankshaft pulley diameter too small

Aftermarket under-drive crank pulleys spin accessories more slowly and can severely reduce alternator output. Ensure the crank pulley is at least OEM size.

Main vehicle charge wire too small or not upgraded

Factory charge wiring is sized for OE amperage. When loads rise, upgrade to a heavier-gauge cable such as the Big Zero kit to avoid voltage drop and false low-output symptoms.

Too many grounds, insufficient grounds, or just bad wiring

Improper, corroded, or excessive grounds-as well as undersized or poorly crimped wires-can cripple alternator performance. Have a qualified technician inspect and correct wiring.

Bad, old, weak, damaged or cheap battery

Weak or inexpensive batteries-especially some gel-cell types-may not accept the alternator's current. Use a healthy wet-cell battery with sufficient cold-cranking amps.

Alternator possibly damaged during installation

High-output units contain sensitive electronics. Skipping the recommended battery-disconnect procedure or other steps in Technical Tip TT-648 can damage the regulator and cause no-charge conditions.

The alternator I bought from you doesn't fit.

Direct-fit models require no hardware changes. Universal Fitzall 220A+ units need custom brackets and may require a shorter belt.

Do you sell brackets, spacers or hardware to mount the Fitzall on my particular application?

Due to the vast number of vehicles, PowerBastards does not supply custom mounting hardware. Most customers fabricate brackets themselves or hire a qualified shop.

I tested my alternator and it only makes 30A.

Alternators supply only the amperage the system demands. Clip-on amp meters can be inaccurate; 30 amps may be normal at low load. Send the unit in for a free certified output test if in doubt.

High Output Alternators

Choose Your Make:

View ALL Makes

High-Output Alternators for Dodge

Home

» High Output Alternators

» Dodge

High-Output Alternators for Dodge

The following discounts apply to all these products.

Free USPS Ground

« Previous...2021222324252627282930...Next »

When you drive a Dodge, you expect unmatched power, bold styling, and dependable performance. At PowerBastards, we share that passion for strength and reliability. Our High Output Alternators for Dodge are carefully engineered to provide the electrical power your vehicle needs while guaranteeing long-term durability. Whether you're conquering trails in your Durango, taking your Challenger to the track, or towing heavy loads with your Ram (pre-2009), these alternators are designed to perform without compromise.

Why a Dodge High-Amp Alternator Means True Dependability

Factory alternators aren't designed to handle heavy electrical demands from aftermarket lighting, upgraded sound systems, and other high-draw accessories. A Dodge high-amp alternator offers increased output capacity, ensuring your entire electrical system runs smoothly no matter how many accessories you add.

A high-amperage alternator for Dodge keeps your battery fully charged and protects sensitive electronics from voltage dips and fluctuations. By maintaining steady voltage across all RPM ranges, it reduces the risk of dimmed headlights, sluggish accessories, and unexpected failures. Built with premium materials and advanced components, each Dodge high amp alternator delivers strong, reliable performance you can count on.

Tested and Proven for Maximum Reliability

Every High Output Alternator for Dodge we offer undergoes rigorous quality and performance testing to ensure it meets the toughest demands. Designed to withstand extreme temperatures, heavy vibrations, and harsh driving conditions, our Dodge performance alternator options deliver the reliability that Dodge drivers expect.

Upgrading to a Dodge alternator upgrade means investing in consistent power that supports high-demand systems like fuel setups, heavy-duty winches, and advanced off-road lighting. Our alternators keep your electrical system protected and fully powered, so you can focus on the road ahead without worrying about unexpected failures.

Direct-Fit Installations for Hassle-Free Upgrades

Our High Output Alternators for Dodge are built for precise, direct-fit installation. You won't need to wrestle with messy wiring or spend hours modifying parts to make them work. Each alternator is engineered to match your Dodge model exactly, some of which are

This ensures a smooth, straightforward installation, saving you time and frustration.

Heavy Duty Power Built for Dodge Owners

Dodge vehicles are built to handle big challenges, and your alternator should be no different. Our heavy duty alternator Dodge options are crafted to support high-demand setups without faltering. No matter if you're tackling rocky trails, hauling equipment, or cruising city streets with all your electronics on, these alternators deliver reliable, consistent power.

A Dodge performance alternator from PowerBastards is more than just a simple replacement — it's an essential upgrade that improves your vehicle's reliability and efficiency. You get peace of mind knowing your electrical system has the muscle to handle anything you throw at it.

Explore our full range of high-output alternators for Dodge to find the perfect solution for your vehicle. Give your Dodge the power and confidence it deserves, mile after mile.